There are many factors that affect the quality of Edge bander machine, such as the interruption of Edge bander work, the interference of time measurement, the impact of the reliability of the application of working hours and so on. There are several ways to improve work efficiency and quality
1. If the local edge sealing strip fails to be firmly bonded with the plate edge, it can be applied with glue for repair;
2. If necessary, tear off, saw off or mill off the Edge bander strip for re Edge bander;
3. When rust spots are found on the plate, wipe the rust proof oil on the machine in time;
4. Frequently maintain the Edge bander equipment, especially the gluing device of the Edge bander machine;
5. The coordination between the process flow and the process (such as the first drilled plate or door strip group edge sealing, etc.) should be clear that the poor coordination will also have adverse effects;
6. The performance of Edge bander machine (such as track speed), the orientation and height of workpiece placement, the working speed of workers, the ability to judge and handle faults, and the cooperation of workers will affect the normal use of Edge bander machine. Therefore, workers should carry out necessary use training before going to work. If you want to minimize the interruption of working hours, please use skilled workers to operate as much as possible.
The above six points in detail introduced the solution to affect the Edge bander quality of the Edge bander machine.
Comments are closed.
Recent Comments