What are the requirements for the use of the Knife grinding machine

What are the requirements for the use of the Knife grinding machine
When it comes to sharpening machine, the purpose we can think of is to sharpen the knife. In fact, although the name of the sharpener is the sharpener, its purpose is not only to sharpen the knife, today we will learn about other uses of the sharpener.
The purpose of the Knife grinding machine is not only to sharpen the knife, but also to process small hardware, such as: scraper, hoe board, woodworking planer blade, kitchen knife, etc., as well as scraper, bending machine mold, plastic machine blade, grass cutter blade, plate cutter blade, harvester blade, and some small parts plane processing, etc. In addition, the electromagnetic suction cup of the Knife grinding machine can be designed as adjustable angle or fixed, so its use is very extensive.
Before using the sharpener, we must carefully read the instructions to prevent operation errors and accidental injuries. What are the requirements?
Pay attention to check whether the three-phase four wire electricity is normal, and whether the running direction of grinding head and grinding wheel is consistent with the direction indicated by the travel button. During the operation of the machine, the rail shall be lubricated with oil at any time to prevent the rail from wearing due to lack of oil. In the process of tool calibration, if there is any error on the left and right, it can be adjusted by the adjusting screw on the tool holder. In the process of sharpening, it should be noted that the amount of feed should not be too large, which is generally controlled between 0.0 and 0.02mm, so as to prevent the too large amount of feed from causing the paste knife and the too high heat to deform the blade, so that the edge of the sharpened blade is not in a straight line.
When the Knife grinding machine is not used, the water stains on the tool holder must be wiped clean and greased or oiled to prevent rusting, so as to ensure that the surface of the Knife grinding machine is clean.

Comments are closed.